Installation instructions for fire door pipe well locks
Update 2016-01-18 16:22:52 In order to ensure that the documents are easy to read and save, the specifications of the fire door are downloaded in the form of Baidu network disks.
Standard for installation and maintenance of pipe locks
Operation points and precautions
Regardless of the right and left of the tube lock, the left and right fans change the direction of the lock body.
Install the lock body on the upper side of the door leaf, the square tongue on the lower side, and the lock core hole on the upper side. The steel door is directly screwed with M4. Put a wood screw on the wooden door, smash it into a third with a hammer, and then two-thirds with a screwdriver. It is strictly forbidden to hit the screws directly to the end. After installation, the lock panel cannot be higher than the fan plane (average operating time 40S).
Install the lock cylinder, pull out the key of the lock cylinder, put the two screw holes upwards, put the lock cylinder from the keyhole on the back side of the fire, and fix the lock cylinder with screws on the fire side. The key is in the wrong direction, and the key cannot be pulled out (average operating time 40S).
Lay the door of the tube well cover flat, and then use the screws to align the holes of the connecting rods to tighten the screws. (Average operating time 50S)
Turn the key lock tongue to eject, and the key rotates 90 degrees back, and the key can be pulled out. The key is flexible without jamming. (Average operating time 10S)
After clicking the download link, please enter the document extraction code: senv防火门闭门器要求 Previous: Fire door closers requirements 防火卷帘门验收规范 Next post: Fire shutter door acceptance specifications