һţƱ

Fire design management regulations for fire design companies based on fire design basis

Update 2016-12-19 10:56:49
In order to ensure that the documents are easy to read and save, the specifications of the fire door are downloaded in the form of Baidu network disks. The document extraction code is below this content.

The fire protection design of the construction project needs to refer to the relevant fire protection regulations. This regulation clarifies the reference basis for the fire protection design of the construction project. If it violates the regulations, it is a non-standard fire protection design, and should be corrected.

106 号) "Regulations on Fire Engineering Supervision and Management of Construction Projects" (Decree No. 106 of the Ministry of Public Security )

Directory

Chapter I General Provisions

消防设计、施工的质量责任 Chapter II Quality Responsibility for Fire Protection Design and Construction

消防设计审核和消防验收 Chapter III Fire Design Review and Fire Acceptance

消防设计和竣工验收的备案抽查 Chapter IV Filing and Inspection of Fire Protection Design and Completion Acceptance

执法监督 Chapter V Law Enforcement Supervision

法律责任 Chapter VI Legal Liability

Chapter VII Supplementary Provisions

Chapter One         General

为了加强建设工程消防监督管理,落实建设工程消防设计、施工质量和安全责任,规范消防监督管理行为,依据《中华人民共和国消防法》、《建设工程质量管理条例》,制定本规定。 Article 1 These regulations are formulated in order to strengthen the supervision and management of fire protection of construction projects, implement fire control design, construction quality and safety responsibilities of construction projects, regulate fire control supervision and management behaviors, and comply with the Fire Protection Law of the People's Republic of China and the Regulations on Quality Management of Construction Projects.

本规定适用于新建、扩建、改建(含室内装修、用途变更)等建设工程的消防监督管理。 Article 2 These regulations apply to fire supervision and management of construction projects such as new construction, expansion, and reconstruction (including interior decoration and change of use).

This regulation does not apply to the construction of residential interiors, villagers' self-built houses, disaster relief and other temporary construction activities.

Article 3    Construction, design, construction, engineering supervision and other units shall abide by fire protection regulations and national fire protection technical standards, and shall be responsible for the fire protection design, construction quality and safety of construction projects.

The fire protection agencies of public security organs shall carry out fire protection design review, fire acceptance and record-keeping, and random inspection of construction projects in accordance with law.

除省、自治区人民政府公安机关消防机构外,县级以上地方人民政府公安机关消防机构承担辖区建设工程的消防设计审核、消防验收和备案抽查工作。 Article 4 In addition to the fire protection agencies of the public security organs of the people's governments of the provinces and autonomous regions, the fire protection agencies of the public security organs of the local people's governments at or above the county level shall be responsible for the fire protection design review, fire inspection acceptance, and random inspection of the construction projects under their jurisdiction. The specific division of labor shall be determined by the fire protection agencies of the provincial public security organs and reported to the Fire Bureau of the Ministry of Public Security for the record.

     The fire protection design review, fire inspection and acceptance, and record-checking of construction projects across administrative regions shall be under the jurisdiction of the fire protection agency of the public security organ at the next higher level.

The fifth    The implementation of fire protection supervision and management of construction projects by fire protection agencies of public security organs shall follow the principles of fairness, strictness, civilization and efficiency.

Article 6    The fire protection design and construction of construction projects must meet the national fire protection technical standards for engineering construction.

Before the newly issued national engineering construction fire protection technical standards are implemented, if the fire protection design of the construction project has been qualified or filed by the fire protection agencies of the public security organs, the original review opinions or the standards at the time of filing shall be implemented, respectively.

Article 7    The fire protection agencies of public security organs shall conduct fire protection design review, fire inspection acceptance, and record-checking of construction projects, which shall be carried out by two or more law enforcement personnel.

Chapter two    Quality responsibility for fire protection design and construction

eighth    The construction unit shall not require design, construction, engineering supervision and other relevant units and personnel to violate fire protection regulations and national engineering construction fire protection technical standards, reduce the quality of fire protection design and construction of construction projects, and assume the following fire design and construction quality responsibilities:

(1) Applying for fire protection design review and fire acceptance of construction projects in accordance with law, handling the fire protection design and completion acceptance filing procedures and accepting spot checks in accordance with the law; if the public gathering place set up in the construction project has not gone through fire safety inspection or has failed to meet fire safety requirements after inspection, Shall not be put into use or business;

(2) For construction projects that carry out engineering supervision, the quality of fire protection construction shall be entrusted to the supervision together;

(3) selecting fire protection design and construction units with nationally prescribed qualification levels;

(4) selecting qualified fire protection products and building components, building materials and interior decoration materials that meet the requirements for fire performance;

(5) Construction projects that are subject to fire design review and fire acceptance in accordance with law. Construction shall not be organized if they have not been audited or failed in the audit; those that have not been accepted or failed in acceptance shall not be delivered for use.

Article 9    The design unit shall bear the following quality responsibilities for fire protection design:

(1) Fire protection design shall be carried out in accordance with fire protection regulations and national engineering construction fire protection technical standards, and the fire protection design documents meeting the requirements shall be compiled, and design shall not be made in violation of the mandatory requirements of national engineering construction fire protection technical standards;

(2) The fire protection products and building components, building materials, and interior decoration materials that have fire performance requirements in the design shall indicate specifications, performance and other technical indicators, and their quality requirements must conform to national standards or industry standards;

(3) Participating in the construction project acceptance inspection organized by the construction unit, signing and confirming the implementation of the fire protection design of the construction project.

Article 10    The construction unit shall assume the following quality and safety responsibilities for fire protection construction:

Details please download and view

Link: http://pan.baidu.com/s/1dFmQtvb Password: axb4

Download link

After clicking the download link, please enter the document extraction code: axb4

消防设计之建筑内部装修设计防火规范 Previous: Fire prevention code for fire protection design of building interior decoration design
中华人民共和国现行消防法最新版 Next: The latest version of the current fire protection law of the People's Republic of China
防火门十大品牌
Hebei Jiu'an Fire Door Manufacturing Group Co., Ltd. <br /> Sales Hotline: 0312-5971018 18932668178
Company Fax: 0312-5971010
Address of the head office: China Top Ten Brand Fire Doors, No. 531 Fengqi Street, Private Technology Industrial Park, Qiyi East Road, Baoding City, Hebei Province
a